Part Testing in Missouri: Why Your Product Is Only as Good as Its Proof–You can machine the cleanest cuts, mold the most precise plastic shapes, or design the sharpest-looking parts, but if they can’t pass inspection, none of that matters. That’s why part testing in Missouri is such a critical part of what we do at LeVic Plastics. It’s not just a final step, it’s built into how we work.
There’s too much on the line to guess. Whether your part ends up in a medical device, a testing chamber, or a piece of aerospace equipment, it needs to perform. No ifs, ands, or maybes.
Why Part Testing Is a Must, Not a Maybe
We’ve seen it before. A manufacturer produces a batch of parts that look good on the outside, but don’t meet the tolerances on the inside. Or worse, the material isn’t consistent, and the part fails in the field. That kind of mistake doesn’t just cost time; it can damage your product’s reputation, hurt your client relationships, or delay production for weeks.
That’s why every single component we produce undergoes documented part testing in Missouri before it ever leaves our facility. We check dimensions, surface finish, insert placement, material flow, and more, depending on the project. Because we don’t assume parts are good, we prove it.
Trusted by Medical Manufacturers
When you’re producing parts for healthcare use, you don’t have room for error. That’s why we’ve become a preferred medical supply manufacturer in Missouri for companies that demand airtight quality control.
Our medical clients know we don’t just build their components; we make sure every single one meets the specs required for use in patient-facing products. From device housings to internal components, we make sure it performs under pressure and meets the same standard, every single time.
If it fails inspection, it doesn’t move forward. That’s our rule.
How Testing Supports Better Design
Testing isn’t just about catching defects’s about improving outcomes. We work closely with engineers and procurement teams who are still in the early design stage. By offering insights on material performance and tolerances, we help make sure their designs are manufacturable and testable before production even begins.
And as an experienced medical part manufacturer in Missouri, we can provide guidance on how small tweaks to wall thickness, gate locations, or mold geometry might affect final part performance. The result? Fewer surprises and better reliability right from the start.
Built for Repeatability
One-time success doesn’t cut it. Your parts need to pass inspection every time, not just once. That’s why our shop is designed for consistency. From our injection molding line to our CNC machining in Missouri department, we track tooling setups, material batches, and production parameters to ensure repeatability.
It’s how we help you avoid variation over time, even if your run includes thousands of parts produced over several months.
We also store critical job data, test results, and inspection logs so you’ve got a clear paper trail when it comes time for audits, certification, or reorders. You’ll always know how your parts performed and why.
What We Check and How We Catch It
Depending on the job, our part testing may include digital caliper measurements, micrometer checks, surface roughness testing, visual inspections, and functional testing like press-fit evaluations or thread verification.
If we’re working with molded components, we’ll check flow lines, sink marks, parting lines, and insert alignment. For machined parts, we’ll inspect bore sizes, hole spacing, finish tolerances, and flatness.
The goal is simple: make sure what we made matches what you ordered.
Tooling Services That Support Quality from the Start
Quality starts before production ever begins. When we design and build custom tools, we focus on consistency. Our in-house tooling services in Missouri include mold design, fabrication, and tuning, so the first part out of the tool already hits your spec.
And if your job requires lightweight tooling, we also produce aluminum molds in Missouri designed for shorter runs or faster cycles. These tools are held to the same inspection standards, and we test the output before releasing them for full production.
That’s how we ensure your parts start strong and stay strong.
.
You’ve Got an Idea. We Know How to Build It.
Whether you’ve got a sketch on a napkin or a full-blown product line, we’ll help you get your parts made without the runaround. At LeVic, we’ve been doing this a long time. We handle the tooling, the molding, the painting, the whole thing.
No minimums. No nonsense. Just a team that picks up the phone and gets to work.
Want to see if we’re a good fit? Call us at 816-761-8484 or reach out here.
We’ll walk through it with you, plain and simple.
We look forward to hearing from you soon!
